LF-6000-2075 DESOLDERING STATION DESOLDERING STATION

INNOVATIVE FEATURES OF THE ALL NEW LF6000-2075:

ENERGY SAVER: Automatically powers down after 15 minutes of idling indicated by the Pause LED-saving power while extending tip life. DELAYED SUCTION: Pump will continue sucking for 1-2 seconds after actuator is released, clears the tubes and prevents clogging of the tip. DIGITAL DISPLAY: Temperature Set/Read is made easy! CONVENIENT CELSIUS/FAHRENHEIT SWITCH

STANDARD FEATURES:

• READ OUT:
  Large digital temperature display.
• TEMPERATURE STABILITY:
  Tip temperature accurated to within ±3°C (6°F)
• SPIKE FREE CIRCUITY:
  Zero Voltage switching and fully grounded design makes this unit safe on electro-sensitive devices.
• ELECTRONIC TEMPERATURE CONTROL:
  Adjustable Temperature w/o changing tips.
• VACUUM SWITCH:
  Suction is controlled by a finger actuated thyristor circuit located fro ease of operation on the desoldering handle.
• PUMP:
  A self-contained diaphragm vacuum pump engineered to provide continuous, maintenance free operation.
• ISOLATED POWER SUPPLY:
  Powered by a high quality 24Va.c. transformer.

SPECIFICATIONS:

Mains power Va.c.	As Requested
Iron assembly	Desolder Iron	Hot-Air Pencil (optional)
Part #	DIA80	HAP80
Heater output	32Va.c.	32Va.c.
Heater power	80W	80W
Vacuum pump operating voltage	115Va.c. for 100-120V 230Va.c. for 220-240V mains power
Temperature range	300-450°C 572-842°F	Max. 350°C 662°F
Dimensions (WxLxH)	200 x 235 x 115 mm³ 7.9 x 9.3 x 4.5 in³
Net weight (excluding optional accessories)	5.3 kgs (14.3 ld.)

OPTIONAL HOT-AIR PENCIL HAP80
FOR SMD SMALL CHIPS, SOT REWORK

FEATURES:

• HAP 80 provides a fast, efficient method to remove or reflow Surface Mount5 Devices.
• High preformance yet inexpensive
• Non-burning sillcone rubber cable

SPECIFICATIONS

Part No. HAP80 Compatible Stations LF-6000-2075, LF-7000-2075, & LF-8000-2075 Heater Output 32Va.c. Heater Power 80W Max. Temp. 350°C(662°F)

Also see 628 Preheater.

 

Back To The Top

Back Home

---

      

---